ISC Rigging Rope Wrench =
Hem » Riggning » ISC Rigging Rope Wrench
  • ISC - Rigging Rope Wrench
  • Action Foto Rigging Rope Wrench (Boel)
  • Action foto Rigging Rope Wrench
  • Rope Wrench Box

ISC Rigging Rope Wrench

Nya innovatiova Rigging Rope Wrench från ISC.
Artnr: IS-RP292AA
Lagerstatus: Beställningsvara 10-12 Dagar
1 2 3 4 5
(0/5) Bli först med att betygsätta.
2793 SEK


The Rigging Rope Wrench takes Kevin Bingham’s original Rope Wrench concept for adding mid-line friction and turns it on its head. This allows the climber to control the load, from the tree-top.

The Rigging Rope Wrench applies friction to a lowering line whilst anchored at the top of the tree. This means that not only is the device controllable from the ground, but the line can also be passed to the climber in the treetop, should they need to take control.

Giving control to the climber is useful when working in smaller crews, or when the grounds-person is struggling to control the lowered section and the end of the line at the same time. With the Rigging Rope Wrench the climber can control the rope, leaving the grounds-person’s hands free to control the lowered section.

From their position in the treetop, the climber can also use the device to suspend the weight of the section, allowing the grounds person to easily guide the section clear of the working area, without the need to lift or drag the full weight of the section. In the event of needing to lift a section up over an obstacle, or apply upwards tension, the Wrench will disengage, removing the applied to allow a smooth haul up.

The Rigging Rope Wrench has been optimised for 13mm (1/2”) rope, making it the ultimate lightweight rigging kit, when teamed with hollow-braid slings.

For added versatility, the Rigging Rope Wrench can be placed in the traditional position at the base of the tree. In this position, additional pulleys can be rigged, in order to increase mechanical advantage, for ease of lifting heavy loads.

RP292 One-way Locking Bearing

For loads ranging from 20 to 120kg (44-264lbs)

The RP292 is fitted with a one-way locking wheel, which provides additional friction when lowering, allowing increased control of heavy loads, during lowering. During lifting, the wheel runs freely.

Technical Specifications:

Rope diameter range (mm)13
Compatible with rope diameter (mm)13
(WLL) Working Load Limit (kg)20-120
(WLL) Working Load Limit (lbs)44-264
(MBS) Minimum Breaking Strength (kN)30
(MBS) Minimum Breaking Strength (lbf)6744
Bearing typeBearing
Weight (grams)475
Weight (ounces)17
Height (mm)190
Height (inches)7.5
Width (mm)52
Width (inches)2
Thickness (mm)45
Thickness (inches)1.8


Artikelnamn: ISC Rigging Rope Wrench
Artnr: IS-RP292AA
Lagerstatus: Beställningsvara 10-12 Dagar
Dokument (2)


Lämna ett omdöme
Omdöme (0)


Blogga om
Andra varor från samma fabrikat
  • ISC
    Nya CE, EN12278:2007 godkända UltraLink från ISC Wales
    från 275 SEK
  • ISC
    Offset Oval Karbin med "Anti Snag"
    210 SEK
  • ISC
    HMS Karbin i 1 eller 3 pack
    från 249 SEK
  • ISC
    Nya APEX/ Squirrel Flex System. Får bara användas på Drenaline eller Xstatic ...
    3400 SEK